Compliance shall be provided by equivalent facilitation or to the greatest extent possible without creating an unreasonable hardship but in no case shall the cost of compliance be less than 20 percent of the adjusted construction cost of alterations, structural repairs or additions.
STEAM SHOWER BENCH FULL
When the adjusted construction cost, as defined, exceeds the current valuation threshold, as defined, and the enforcing agency determines the cost of compliance with Section 11B-202.4 is an unreasonable hardship, as defined, full compliance with Section 11B-202.4 shall not be required.When the cost of full compliance with Section 11B-202.4 would exceed 20 percent, compliance shall be provided to the greatest extent possible without exceeding 20 percent. When the adjusted construction cost, as defined, is less than or equal to the current valuation threshold, as defined, the cost of compliance with Section 11B-202.4 shall be limited to 20 percent of the adjusted construction cost of alterations, structural repairs or additions. Projects consisting only of heating, ventilation, air conditioning, reroofing, electrical work not involving placement of switches and receptacles, cosmetic work that does not affect items regulated by this code, such as painting, equipment not considered to be a part of the architecture of the building or area, such as computer terminals and office equipment shall not be required to comply with Section 11B-202.4 unless they affect the usability of the building or facility.The addition or replacement of signs and/or identification devices shall be limited to the actual scope of work of the project and shall not be required to comply with Section 11B-202.4.Alterations of existing parking lots by resurfacing and/or restriping shall be limited to the actual scope of work of the project and shall not be required to comply with Section 11B-202.4.Removing high-pile, low-density carpeting.Creating designated accessible parking spaces.Repositioning the paper towel dispenser in a bathroom.Installing a full-length bathroom mirror.Insulating lavatory pipes under sinks to prevent burns.Rearranging toilet partitions to increase maneuvering space.Eliminating a turnstile or providing an alternative accessible route.Installing offset hinges to widen doorways.Adding raised markings on elevator control buttons.
STEAM SHOWER BENCH CODE
Alterations solely for the purpose of barrier removal undertaken pursuant to the requirements of the Americans with Disabilities Act (Public Law 101-336, 28 C.F.R., Section 36.304) or the accessibility requirements of this code as those requirements or regulations now exist or are hereafter amended including, but not limited to, one or more of the following items shall be limited to the actual scope of work of the project and shall not be required to comply with Section 11B-202.4:
0 kommentar(er)
